9015 Artica AVONITE® Acrylic Solid Surface

Experience this product

Samples cannot be configured.

Product Images

Desk surface in 9015 Artica AVONITE® Surfaces Acrylic Solid Surface

Details

AVONITE® comes in a broad palette of colours, patterns and designs. A non-porous, easily cleaned, anti-microbial and stain resistant surface, Avonite® pairs incredible versatility with elegant beauty. These surfaces can be used in vertical or horizontal application, can be applied in straight or curved lines, and are thermoformable into a myriad of shapes. From whites and beiges to bold colours, from monochromatic to speckled multi-coloured, the only limit is the imagination.

Contact your sales or specification representative for more information on how to specify Gulf Coast from Avonite®.

Care and Maintenance Guide

Matte Finish

  • Cleaning: Soap and water will clean most stains. For more stubborn stains use a green Scotch-Brite® pad and an abrasive cleanser.
  • Scratches: To remove scratches, start sanding with 240 grit paper and then clean with an abrasive cleanser and a green Scotch-Brite® pad. Remember to periodically go over the entire matte surface with a dry, green Scotch-Brite® pad to return the original finish.

Satin Finish

  • Cleaning: Soap and water will clean most stains. For Stubborn Stains use a white Scotch-Brite® pad and non-abrasive cleanser such as Soft Scrub™.
  • Scratches: To remove scratches, start sanding with 400 grit paper followed by 600 grit paper. Then clean the area with Soft Scrub™ and a white Scotch Brite® pad.

High Gloss

  • Cleaning: Soap and water will clean most stains. Use a polishing compound like 3M Perfect-It and a soft cloth to remove more stubborn stains.
  • Scratches: To remove scratches from a high gloss finish, start sanding with 400 grit paper. The surface must then be machine polished back to it’s original finish. If you do not own or have access to this equipment, you should contact you local AVONITE® fabricator for assistance.

Specifications

Wet Wall™ 6mm solid surface sheets 

 

The need for an aseptic environment does not mean having to compromise on design. Specify AVONITE® Wet Wall™ 6mm — these solid surface sheets do not absorb bacteria, can be cleaned using common household products, are seamlessly assembled, and the material malleability makes it possible to design curved, rather than angular, corners, for more efficient cleaning 

 

Finishing Guidelines:

Matte Finish:

  

After removing the linear sanding lines with 60 micron paper, place a Scotch-Brite® pad, (#7447 Red) under the sanding pad to even out the finish. The matte finish is easily maintained and is usually the most suitable for lighter colors. 

  

Satin Finish: 

 

Most solid surface samples are satin finished and likely will be what the customer is expecting. Sand with 60 micron paper, repeat sanding process with 30 micron paper. Place Scotch-Brite® pad (#7448 light gray) under sanding pad. Sand with Scotch-Brite® #7448 and soapy water. Homeowners may maintain this finish using a white Scotch-Brite® and Soft Scrub®. 

  

Polished Finish: 

  

After sanding with 60 micron paper, repeat the sanding process with 30 micron paper. Use a 3M Super Buff adapter to prevent the arbor of the polisher from damaging the surface. Whenever possible, use a vacuum attached to the sander to minimize sanding dust back into the surface top. Dark colors with a high gloss finish show wear very quickly. A dark color is not recommended for heavy use areas. 

  

Warranty: 

 

Limited Warranty Commercial and Residential Interior Applications:

Aristech Surfaces LLC (“ARISTECH”) warrants to the original purchaser of any of its manufactured solid surface products that ARISTECH will, at its option and sole discretion, repair or replace the product if such product fails due to an ARISTECH manufacturing defect which is discovered during the first fifteen (15) years after the initial purchase, subject to the limitations set forth in this Limited Warranty. 

  

See “Warranty” link for complete warranty information. Warranty subject to terms and conditions as specified.

Reaction to Fire: 

  
  • Class A, ASTM-E84
 

Sustainability Standards Certifications:

 
  • Declare Label 
  

Living Building Challenge Criteria:

  • Compliant

I-13 Red List:

  • LBC Red List Free

AVONITE® Solid Surface and STUDIO Collection® design resin product lines each provide a LEED v4 compliant Environmental Product Declaration (EPD) and Health Product Declaration (HPD).  All these products are SCS Indoor Advantage Gold™ certified, Living Building Challenge Red List Free, and NSF certified for Food Zone 1 use. 

 

For more information:

  • Explore the Links section below
  • Contact Us
  • Contact your Sales or Specific Representative

Applications

  • Kitchen Counters
  • Vanity Cabinets
  • Sink Counters
  • Sinks
  • Shower Pan
  • Wet Wall
  • Wall Paneling
  • Acoustic Paneling
  • Wall Protection
  • Interior Millwork
  • Residential Indoor Furniture
  • Commercial Indoor Furniture

Details

AVONITE® comes in a broad palette of colours, patterns and designs. A non-porous, easily cleaned, anti-microbial and stain resistant surface, Avonite® pairs incredible versatility with elegant beauty. These surfaces can be used in vertical or horizontal application, can be applied in straight or curved lines, and are thermoformable into a myriad of shapes. From whites and beiges to bold colours, from monochromatic to speckled multi-coloured, the only limit is the imagination.

Contact your sales or specification representative for more information on how to specify Gulf Coast from Avonite®.

Care and Maintenance Guide

Matte Finish

  • Cleaning: Soap and water will clean most stains. For more stubborn stains use a green Scotch-Brite® pad and an abrasive cleanser.
  • Scratches: To remove scratches, start sanding with 240 grit paper and then clean with an abrasive cleanser and a green Scotch-Brite® pad. Remember to periodically go over the entire matte surface with a dry, green Scotch-Brite® pad to return the original finish.

Satin Finish

  • Cleaning: Soap and water will clean most stains. For Stubborn Stains use a white Scotch-Brite® pad and non-abrasive cleanser such as Soft Scrub™.
  • Scratches: To remove scratches, start sanding with 400 grit paper followed by 600 grit paper. Then clean the area with Soft Scrub™ and a white Scotch Brite® pad.

High Gloss

  • Cleaning: Soap and water will clean most stains. Use a polishing compound like 3M Perfect-It and a soft cloth to remove more stubborn stains.
  • Scratches: To remove scratches from a high gloss finish, start sanding with 400 grit paper. The surface must then be machine polished back to it’s original finish. If you do not own or have access to this equipment, you should contact you local AVONITE® fabricator for assistance.

Applications

Specifications

  • Kitchen Counters
  • Vanity Cabinets
  • Sink Counters
  • Sinks
  • Shower Pan
  • Wet Wall
  • Wall Paneling
  • Acoustic Paneling
  • Wall Protection
  • Interior Millwork
  • Residential Indoor Furniture
  • Commercial Indoor Furniture